滄燦張BLH450K-50東方馬達

• 規(guī)格：個
• 品牌：東方
• 用途：

Terminals 6 x 1.5mm2
Cable fixing PG9, clamping range 6.5mm - 9.5mm
Measuring range max. ±1 degree , smaller ranges optional
Resolution 0.01 arc seconds = 48μm/km!
Degree of protection IP65
Mounting orientation see drawing
Supply voltage optional 12Volt oder 24Volt (±10%)
Operating current max. 100mA
Normalized asymmetric output voltage range (GND -> Ua+) 0.5V ... 4.5V
Normalized asymmetric output voltage range (GND -> Ua-) 4.5V ... 0.5V
Normalized symmetric output voltage range (Ua- -> Ua+) -4V ... 4V
Asymmetric zero output voltage (GND -> Ua+) 2.5Volt
Asymmetric zero output voltage (GND -> Ua-) 2.5Volt
Symmetric zero output voltage (Ua- -> Ua+) 0 Volt
Output impedance approx. 100 Ohm
Recommended cable see drawing
Cable length taking voltage drop due to the operating current into account any (e.g. 500m for 12V or 1km for 15V voltage supply and using the recommended or equivalent cable)
Capacitive output loading capacity any
Resistive output loading capacity greater than 100 kOhm
Output driver operational amplifier TLC2274
Adjustable variable amplification
Signal rise time (to 98% of step input) approx. 2 seconds
Step input response PT2
Operating temperature -40°C ... +85°C
Mechanical angle adjustment range ±2°(angle)
Options: special measuring ranges, calibration record, partial silicon encapsulation, custom wiring

Dimensions (in mm) and Connections
SB360
Sensor box containing one NG360 inclinometer with RS485 interface
SB360[+]
SEIKA front page
print version (pdf)
Features

robust pressure die cast aluminium housing (IP65) with saltwater proof coating
high overload resistance
cable connections at both ends enable use in a chain of inclinometers
up to 78 NG360, SB360 and/or XB360 can be connected to one 4-wire bus
twist free 4-point fastening of rigid, 3.2mm thick base PCB
integrated NG360 inclinometer with RS485 interface
any mounting orientation
NG360 electrically isolated from housing
extensive EMC protection
RS485 terminator (100Ohm) can be connected via solder bridge
all measuring properties identical to NG360
Description

The SB360 is a pressure die cast aluminium sensor housing (IP65) with an integrated NG360 inclinometer for measuring uniaxial inclination.
In addition to the sensor, the box contains extensive EMC protection and RS485 terminator resistance that can be de- and reconnected via a soldering bridge.
The two compact metal cable guides and the small housing size in combination with the RS485 interface enable the use of this high quality measuring system as a chain inclinometer in harsh operating conditions. The implemented interface loops and available addresses enable the connection of up to 78 sensor boxes to one 4-wire bus (2 power supply wires, 2 data transfer lines).

上海滄燦自動化科技有限公司銷售東方 個，針對東方 個客戶提供相關咨詢服務，需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯(lián)系。

 

相關產(chǎn)品

 

 

公司簡介

 

其它地區(qū) 圓度檢測儀 類似信息：