滄燦潘BLH450K-15FR東方馬達

• 規格：個
• 品牌：東方
• 用途：

The SB1U is a pressure die cast aluminium sensor housing (IP65) with an integrated sensor for measuring uniaxial acceleration or inclination.
As well as the sensor, the box contains a signal conditioner with 0 ... 5V output and a separate, highly stable supply voltage that can be used externally as a reference point. Furthermore, the signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, and a noise voltage filter to guarantee the EMC. Interference signals caused by unwanted ground currents are eliminated by electrically isolating sensor and signal conditioner from the housing.
Unlike the SB2.., the SB1U can accommodate larger inclinometers, such as the NG.. series, that have a higher measuring accuracy. A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensor.
The compact PG metal cable gland and small housing size in combination with the max.5-wire connection enable the use of this high quality measuring system in harsh operating conditions.

Application

The SB1U is suitable for applications requiring precise inclination or acceleration measurements under harsh circumstances and returning of a 0 ... 5V output signal. Areas of successful implementation include construction, mining, agricultural machinery, transportation and conveyor systems, ships, operation and automation technology as well as general mechanical engineering.

Technical Specifications

Terminals 6 x 1.5 mm2
Cable fixing M12 x 1.5 cable gland, clamping range 6 - 7.5 mm
Measuring range, Resolution, etc. dependent on implemented SEIKA sensor
Degree of protection IP65
Mounting orientation any
Measuring planes (N.. sensor) 3 main housing planes
Measuring plane (NG.. sensor) parallel to bottom of housing
Measuring directions (B.., BD.. sensor) X,Y,Z coordinates of housing
Supply voltage 9V ... 30V
Operating current approx. 5mA
Normalized output voltage range 0.5V ... 4.5V
Output zero point 2.5 Volt
Maximum output voltage range 0.05V ... 4.95V
Output resistance 100 Ohm
Capacitive output loading capacity any, taking dynamic requirements into account
Output reference voltage (5 ±0.005) Volt (max.0.5mA) 20ppm/K
Adjustable variables zero point (2.5V), amplification
Low pass filter active, 5th order, minimal ripple
Operating temperature -40...+85°C
Options: special measuring ranges, calibration record, silicon encapsulation, custom wiring
SB1S
Sensor box containing one sensor, one signal conditioner with 0...5V output and two open-collector output switches
SB1S[+]
SEIKA front page
print version (pdf)
Features

robust pressure die cast aluminium housing (IP65)
robust pressure die cast aluminium housing (IP65) with saltwater proof coating
twist free 4-point fastening of rigid, 3.2mm thick base PCB
integrated signal conditioner with 0 ... 5V output
temperature drift compensation
9...30 Volt supply voltage
all SEIKA sensors fit the housing and can be installed in different directions of operation
output signal calibrated to customer's specifications
sensor and signal conditioner electrically isolated from housing
EMC certified
highly stable sensor supply voltage
programmable dynamic response
either connection polarity
high overload resistance
low pass filter with optional choice of cut-off frequency for suppression of interference frequencies
two separate, individually adjustable open-collector output switches
switching status indication via two red LEDs
Description

The SB1S is a pressure die cast aluminium sensor housing (IP65) with an integrated sensor for measuring uniaxial acceleration or inclination.
As well as the sensor, the box contains a signal conditioner with a 0 ... 5V output and a separate, highly stable supply voltage that can be used externally as a reference point. Furthermore, the signal conditioner includes an active low pass filter, whole upper cut-off frequency / settling time can be tailored to suit the measurement task, and a noise voltage filter to guarantee the EMC. Interference signals caused by unwanted ground currents are eliminated by electrically isolating sensor and signal conditioner from the housing.
In addition to the voltage output, the SB1S has two open-collector output switches. Two helical trim-potentiometers enable the adjusting of two trigger thresholds within the measuring range, the exceeding of which causes the corresponding output switch to trigger. Optionally, the state transition can be set to be either off to on or on to off. The switching hysteresis can be adapted to the measuring task.
Unlike the SB2.., the SB1S can accommodate larger inclinometers, such as the NG-series, that have a higher measuring accuracy. A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensor.
The compact PG metal cable gland and small housing size in combination with the max. 6-wire connection enable the use of this high quality measuring system in harsh operating conditions.

上海滄燦自動化科技有限公司銷售東方 個，針對東方 個客戶提供相關咨詢服務，需要了解東方 個型號尺寸、重量、價格、安裝、維護等資料請與我們聯系。

 

相關產品

 

 

公司簡介

 

其它地區 圓度檢測儀 類似信息：